Scale/Rotate – Image/Model Selecting the [Scale/Rotate] button or the [Construct Roof > Underlay Image > Scale Image/Model] function on the Pulldown Menu allows the operator to scale the image before… read more →
Group Menu Move These functions are permanently displayed in the Icon menu, usually on the left side of the workspace. Also available from the Pulldown Menu – Construct… read more →
Digitise Aerial Image – Slope Roof The same process can be applied to aerial images. The three steps are: 1 Enable the image, 2 Scale the image and workspace, and… read more →
Verandah/Porch This roof option lets you draw a straight or bullnose verandah quickly and efficiently onto the perimeter lines of the wall or eave. Verandahs are subdivided into Simple and… read more →
Rotate in 2D [Pulldown Menu Only – Construct-Roof > More.. > Rotate in 2D axis] This command lets you rotate selected roof geometry. After selecting [Rotate], you are then prompted… read more →
Smart-Lines By clicking on the Construct Roof > Smart-Lines icon option, the Smart-Lines options appear as described below. Mastering the Smartlines Toolkit is the mark of AppliCad Roof Wizard user competentency… read more →
Curved If you have a symmetrical curved (sprung or barrel vaulted) roof, then you would use the Curved command to draw it. When you click this command, you are prompted… read more →
Copy Array (Pulldown Menu Only – Construct Roof > More..> Copy Array) This function is provided to make copies of roofs or roof elements maintaining the properties of the geometry.… read more →
Complex Verandah (Pulldown Menu Only) By our definition, a Complex Vernadah is one where the distance from the wall to the eave line of the verandah is different at different… read more →
Recover Outline The Construct Roof > Recover command allows you to recover an outline and change it. Note: that no outline is complete and available for recall until after the… read more →